The electrical code setting standards for electrical appliance manufacturers, electrical services providers, and other related electrical industry suppliers undergo constant changes now and then. The National Electrical Code (NEC) sets and enforces the standards. It is worth noting that any advancements in these codes aim to enhance electrical safety, appliance durability, convenience, and leveraging the ever-changing technology. At times, if the problems that these changes in electrical code address are left unfixed, electrical issues might arise that need the immediate attention of an emergency electrician. Below are some possibilities that not being up to code might result into:

Outdated Circuit Breakers

Circuit breakers are essential in protecting your electrical appliances from power surges. This fixture at the heart of your home’s electrical system may sometimes be out-of-date. When the breakers are outdated, they are not breakers anymore. Rather, you’ll have to rely on the old-fashioned glass fuses that feature cartridge fuses for protecting your appliances. This is all hoping that nobody at your home has been using those old tricks for bypassing the fuse for convenience. You might not have to protect your electrical circuit if someone does.

As you can guess, your electrical circuit isn’t protected and poses severe electrical risks. If you realize that you haven’t updated your breakers for several years and there have been changes in the electrical code, you should contact an emergency electrician to see if the changes include circuit breakers. Remember, older breakers are prone to malfunctioning. Electrical overloads should result in a shutdown of your circuits. But What happens if that protection doesn’t work? Well, your home and family might be in for some trouble.

Outdated Wiring

When copper prices soared, electrical component and appliance manufacturers had to look for alternatives. It was generally agreed that aluminum wiring would form a good substitute, thanks to its electrical conductivity. Of course, that was if properly used, installed, maintained, and so forth. Since it isn’t as good a conductor as copper is, the wire had to be pretty different, and connections at every junction, outlet, switch, or light fixture had to be correct.

The aluminum wire would heat up if the conditions above weren’t observed. This warming could result in a raft of issues, such as the expansion and contraction of the connections with time, possibly loosening them. Loose connections are known to cause issues such as arcing and short-circuiting. Hence, installing up-to-code wires is critical to ensuring electrical safety at your home. But how can you know that the wiring at your home is not up-to-code? That’s the easy part. You only have to enlist the help of a reliable electrical technician.

Outdated Electrical Components

Light fixtures, switches, and power outlets are always evolving. Consequently, the standards per NEC also keep changing to accommodate the changes. Additionally, the ones installed at your home are also aging. This combination of factors means that you should always ensure the said components are always to code. Otherwise, the risks you are exposed to will always be growing. You might have a decades-old light switch that sparks and arcs whenever you flip it. While this might only happen occasionally, it sometimes is dangerous.

Light fixtures, especially those with a downward-pointing bulb, handle some heat with expansion, insulating material decay and contraction. If there have been plumbing leaks at your home, you might have some corrosion on the light fixtures. Further, some homes still use two-blade sockets that don’t have a ground connection. Knowing the dangers of such connections, some homeowners try DIY grounding outlets without running a code-worthy ground wire.

And have you seen those electrical outlets installed upside-down? You might have wondered, what’s this? Such practices are common in hospitals. Do you have curious children? Installing code-worthy electrical fittings will ensure their safety. They have coverings that prevent the kids from shoving conducting objects such as spoons and forks inside. If you still use the ungrounded electrical outlets, have an emergency electrician replace them with newer ones that are up-to-code.

Higher Demand for Power

Nowadays, we love our electronic devices. You must only stay briefly before touching your phone or watching a movie on your TV. This means that the electrical outlets will, at most times, be full. Hence, people have turned to using power strips and electrical extension cords. On these, you might have connected several appliances such as your home theaters, amplifiers, and even a huge projection TV. Refrigerators, hair dryers, and dispensers are joined on an extension cord with other handy devices that draw considerable power. You do all this without considering their power ratings.

It is hard to tell, but some appliances are power-hungry and draw nearly all the rated power of the circuit. They could be powerful electronics you cannot suspect or larger appliances such as air conditioners. The common mantra that it is all right, provided it works, is dangerous, especially regarding electrical safety. What if the only protection in the consumer box is old, out-of-date breakers and fuses that cannot match the new appliances? You will end up having to call an electrician.

Surge Protection

Power surges are more likely now than they were previously. If you have an old-style washing machine or air compressor in your garage, you’ve certainly seen the light bulbs flicker as they cycle on and off. That’s not ideal for modern gadgets, and because both computers and TVs are pricey, you probably don’t want to consider what would happen if your gaming system breaks. Emergency electricians may install a whole-house solution that offers surge protection for any delicate equipment you own, regardless of where it is plugged in.

When was the last time you inspected your electrical systems? If you cannot recall, now is the time to have one. Contact us at Buffalo Electric for a professional electrical system inspection and fixes to ensure all components are up-to-code.

See our most recent blog on this topic here.

Find out our service area here.

Photo By I AM NIKOM at Shutterstock

What To Consider When Hiring A Commercial Electrician

Electric accidents are common in the modern era, where businesses and homes depend on electricity for smooth operation. Due to the sensitive nature of these installations, there are clear guidelines on who should handle electrical work. Across the United States, property owners and contractors are legally required to contract the services of a certified electrician to handle all matters of electricity.

An electrical technician is trained and experienced in handling a wide range of issues, including installations, repairs, and maintenance. Hiring these professionals has a lot of benefits; however, there are a few things you need to consider when hiring. While this principle is vital for commercial projects, it applies to all areas involving electricity. Here are factors to consider when contracting a commercial electrical company.

Factors to Consider When Contracting a Commercial Electrical Company

Qualifications

Commercial projects are often expensive and extensive. You don’t want an unqualified worker handling your installation, replacement, or repairs since a botched job can lead to huge losses. You need to hire a reliable firm with a pool of experienced technicians with industry knowledge. Keep in mind that a company’s reputation may not be enough since the electrician handling your project may have little to no experience.

Working with seasoned personnel means they can easily diagnose your issues and provide a viable solution, unlike inexperienced colleagues. Depending on the scope of the work, a highly rated company such as Buffalo Electric will send a ‘journeyman electrical technician.’ Unlike regular technicians, these professionals undergo four years of extensive training, gaining experience handling multiple cases, big or small.

Insurance

Electrical works are one of the most dangerous jobs in the world, with a high risk of injury or fatality. Aside from personal injuries, these works can often result in extensive damage to the property. Before hiring a commercial electrical company, ensure the company has a liability and worker’s compensation insurance policy. This cover helps protect you from any financial obligation related to the job. For example, if a worker gets electrocuted during rewiring, the policy can cover their medical bill.

Working with an insured firm leaves you vulnerable to lawsuits, and sometimes, your insurance provider can refuse to honor your claim. A responsible and reputable electrical firm will work towards protecting its workers and clients from the dangers of working with electricity.

Flexibility

Being a commercial property means it’s open for business almost every day. You need to have an electrician who can respond to emergencies or respond to calls at any time of the day or week. Besides timely response, commercial electrical technicians need to be adaptable due to the dynamic nature of commercial projects. These technicians should be able to adjust quickly to challenges to get the project back on track.

Their flexibility should also be seen in their communication. Your electrical technician should be easy to talk to and exchange ideas. Being able to approach your team creates a conducive work environment for a successful project.

Cost

Money is usually the least deciding factor when choosing a contractor for your commercial project. These projects are often complex and require utmost care during installations and repairs to avoid a botched job. Working with a cheap technician means cutting corners to meet demand. While this may seem like a good way to save money, it can prove costly in the future, especially if the technician jumps hoops on some codes or uses substandard goods.

When using costs and fees as a determining factor, you need to find an electrical company that is transparent with its charges. Some firms are known to bill customers with hidden charges driving up the project’s cost, forcing you to go out of budget.

The contractor should provide a quote for the project, a detailed explanation of the procedures involved, and the reason for the charges. Dealing with a transparent contractor means you can create a budget estimate based on available funds. This information also helps you compare their fees with other electrical companies to find one that best fits your needs.

Scan for References and Reviews

Being a first-time client can be challenging, especially if you don’t know what to expect from a commercial electrical company. Some clients have had a bad experience with some firms, making them weary of contractors, hence some hesitation.

Before committing to a specific contractor, it’s advisable to research different firms in the area. You need to find a professional with a customer-first approach with a proven performance record. Online reviews and references are the best way to get unbiased opinions on a contractor’s services. When looking at their reviews, focus more on the negative reviews to see how they responded. This way, you can gauge their customer engagement and quality of service. You can as well ask the company for at least two references to gain insight into their service delivery.

Guarantees and Warranties

A reputable firm such as Buffalo Electric stands by its work and can vouch for its employees. Guarantees offered by these firms are often tied to their history in the area and past work. You should aim for a team that would go to great lengths to ensure you get the best service to achieve the highest customer satisfaction.

While not many firms offer guarantees and warranties, these two are a measure of a firm’s confidence in their work. It also gives you peace of mind since you don’t have to worry about a botched job that may attract extra costs. A warranty plays a key role in the negotiations as the firm offers to handle repair and maintenance services within the period stipulated.

Visit Buffalo Electric for Exemplary Services

A commercial project is one of the most complex electrical jobs in the field hence the need for top professionals with an understanding of multiple electrical works. A botched job can be costly and, in some cases, delay the re-opening of the property. Interview and review each electrician to find the best fit for your project.

At Buffalo Electric, we boast a wide pool of experienced technicians. Contact us for more information on electrical installations, repairs, and maintenance.

See our most recent blog on this topic here.

Photo By buzbuzzer at istock

Common Problems You Need An Electrician To Fix

If you have circuit breaker problems or frequently receive electrical shocks when turning appliances on or off, it’s time to call in Buffalo Electric to inspect and fix your home’s electrical system. Our certified electricians are licensed and insured and have many years of experience resolving issues such as power surges, warm outlets, and dead outlets for our customers. As well as handling the common problems listed below, we can also provide a complete overhaul of your home’s electrical system to bring it up to modern standards.

You Have Circuit Breaker Problems

Your circuit breaker defends your home against overloads and helps prevent short-circuiting. It interrupts the flow of electricity when an electrical fault occurs. Therefore, if your circuit breaker is continually tripped, you may have underlying electrical problems that require attention. While it’s important to keep your circuit breaker working properly to prevent fires and overheating, you’ll also want our team to inspect your system and find the underlying culprit. This may vary from poor wiring to overloaded outlets that require updating.

There’s no need to worry if you have a problem with your circuit breaker since Buffalo Electric is just a phone call away. Perhaps it happens when you’re overusing your electricity trying to catch up on laundry, while watching your favorite sport, drying your hair, cooking dinner in the oven, and running the dishwasher. Multiple large appliances running at once can trip the breaker.

Buffalo Electric will provide a thorough inspection and make recommendations to improve your power reliability.

Your Electricity Surges or Dips

It may seem counterintuitive but electrical dips and surges are closely related. Power surges come from a spike in electrical charge on the power lines. That increases the surge of energy to your outlets. It may cause your appliances to become overloaded. Meanwhile, electrical dips create brownouts or drops in voltage that may cause flickering lights or interrupt the flow of electricity throughout your home.

Repeated power surges can damage your electronics and appliances. Lightning strikes, damaged power lines and other issues can generate surgeons. If you have appliances plugged into a faulty outlet they may draw too much power from the panel, causing a momentary brownout. Having an electrical expert inspect your home can give you the answers you’re looking for. For example, we can install a whole house surge protector to deal with runaway electric surges.

Whatever is causing an unpredictable electrical supply to your home, Buffalo Electric can find and fix the problem for the safety and convenience of your family.

Your Home has Scarce or Dead Outlets

If you don’t have enough electrical outlets in your home, it’s important to make sure that your current electrical panel can handle more before installing them. While overusing outlets can lead to tripped circuits, adding more outlets without the proper training can lead to even bigger problems.

Our team can inspect your electrical system and provide recommendations and estimates on the best way to resolve your lack of outlets without creating a fire hazard. Depending on the age of your home’s electrical system, we may be able to upgrade the current wiring or we may have to install a new panel box that can handle the demands of a modern household.

Dead Outlets

If you have non-working outlets in your home, there could be deeper problems hiding in the wiring behind your walls. Our trusted electricians can examine your wiring and find out whether it’s an easy fix or requires larger updates.

Frequent Light Bulb Blowouts

Burnt-out light bulbs are typically just an inconvenience solved by a trip to the local hardware store. However, if your bulbs frequently burn out after a recent installation, it could be an issue with overheating. Our reliable, insured electricians can trace the source of the problem and resolve the issue for you.

Some Lights Are Too Dim or Too Bright

On the other end of the spectrum, you may have lights that are constantly dim no matter the wattage of the installed ball. We’ll be happy to take a look at it and see if the problem is a bad neutral connection. At Buffalo Electric, we have been keeping lights burning brightly for local homeowners for many years.

Warm Outlets or Switches and Electrical Shocks

When you touch the outlets in your home, are they warm? That could mean that you’re overloading your wiring with too many gadgets. Make sure to unplug appliances when they’re not in use to prevent fires. It’s also a good idea to spread your appliances and devices around and not to rely too heavily on one outlet.

Do you receive shocks when you touch your lamps or turn them on and off? This could be a result of faulty wiring. Discontinue using the outlet until one of our professionals has time to inspect and fix it.

High Electric Bill

High electric bills may result from faulty wiring. Unplug as many unused devices and chargers as possible to help keep your bill down. You can also turn up the thermostat in the summer or turn it down in winter to minimize the use of your heating and cooling system. If necessary, you can hire an electrical professional from a trusted company, such as Buffalo Electric, to recommend upgrades that lead to energy efficiency and lower bills.

Whether you’re experiencing these or other electrical problems, you can rely on Buffalo Electric to get to the root of the issue. Our flexible financing and commitment to affordable services can help you find a way to improve your access to electrical power without breaking the bank.

Call Buffalo Electric immediately to fix your most onerous electrical issues. We have top electricians committed to providing the right solution for your family.

See our previous post on this topic here.

Photo By frender at istock

How To Choose The Right Emergency Electrician For Your Home Or Business

Electricity is essential to our daily lives, powering our homes, businesses, and devices. However, electrical emergencies can occur anytime, causing inconvenience, damage, and even danger. In such situations, having access to a reliable emergency electrician can make all the difference.

Tips for Finding an Emergency Electrical Service Provider

Finding a reliable emergency electrical service provider can be daunting, especially during an electrical emergency. However, with the right approach and knowledge, you can find an available, experienced, and trustworthy electrician. Here are some tips for finding an emergency electrician that meets your needs.

Research Online

The internet is a great resource for finding emergency electrical service providers in your area. You can search for electricians on search engines, review websites, and social media platforms. Look for electricians with positive reviews and high ratings.

Check Local Directories

Local directories such as Yellow Pages and Yelp can also help you find emergency electrical service providers in your area. These directories often provide contact information, reviews, and ratings of electricians.

Ask for Referrals

Ask your friends, family, and neighbors for referrals to reliable emergency electrical service providers. They may have had positive experiences with electricians and can recommend someone they trust. Buffalo Electric provides references to prospective clients to gather more information about their services.

Check with Your Insurance Provider

Your insurance provider may have a list of recommended emergency electrical service providers that they work with. These electricians may also offer discounts to customers with insurance.

Look for Licensing and Certification

Ensure that your chosen emergency electrical service provider is licensed and certified to work in your state. This ensures they have the necessary training and expertise to handle electrical emergencies.

Consider Experience

Look for an emergency electrician with experience in handling electrical emergencies. Experienced electricians are more likely to diagnose and fix problems quickly and efficiently.

Check Availability and Response Time

Ensure the emergency electrical service provider you choose is available 24/7 and has a fast response time. Electrical emergencies can be dangerous and require immediate attention. Buffalo Electric responds quickly to local client emergencies and provides effective solutions.

Ask for a Written Estimate

Before hiring an emergency electrical service provider, ask for a written repair cost estimate. This will help you avoid surprises when it comes time to pay the bill.

Compare Prices

Compare the prices of different emergency electrical service providers to find one that fits your budget. However, don’t choose an electrician solely based on price. Quality and reliability are more important factors to consider.

Electrical Safety Practices

Electrical safety prevents electrical hazards and accidents in homes and workplaces. Following proper electrical safety practices protects yourself, your family, and your property from electrical fires, shocks, and other dangers. You can follow these practices to ensure a safe and secure environment.

Avoid Overloading Electrical Outlets

Overloading electrical outlets can cause overheating, which can lead to electrical fires. Make sure to use power strips and surge protectors with built-in circuit breakers to prevent overloading

Use Ground Fault Circuit Interrupters (GFCIs)

GFCIs are designed to protect against electrical shocks by shutting off the power when a ground fault occurs. Install GFCIs in all wet areas, such as bathrooms, kitchens, and outdoor areas.

Keep Electrical Cords in Good Condition

Damaged electrical cords can cause electrical shocks and fires. Check cords regularly for fraying, cracking, or other damage, and replace them if necessary.

Use Electrical Appliances Safely

Follow the manufacturer’s instructions when using electrical appliances, and never use them near water or wet areas. Unplug appliances when not in use, and never touch them with wet hands.

Keep Flammable Materials Away from Electrical Sources

Flammable materials such as paper, cloth, and chemicals can ignite when exposed to electrical sparks or heat. Keep them away from electrical sources to prevent fires.

Hire a Licensed Electrician for Electrical Work

Licensed and qualified electricians should only perform electrical work. DIY electrical work can be dangerous and can cause electrical hazards and accidents.

Install Smoke Detectors and Carbon Monoxide Detectors

Smoke and carbon monoxide detectors can alert you to potential electrical fires and leaks. Install them in every room of your home and test them regularly.

Use Proper Lighting

Adequate lighting in your home and workplace helps prevent eye strain and accidents. Use task lighting for specific tasks and ambient lighting for general illumination.

Keep Electrical Panels and Circuit Breakers Accessible

Electrical panels and circuit breakers should be easily accessible in an emergency. Clear them of clutter and debris, and label them properly for easy identification.

Tips for Budgeting and Saving on Emergency Electrical Services

Electrical emergencies can be costly, but there are ways to budget and save on emergency electrical services. By following these tips, you can minimize the cost of emergency electrical repairs and ensure you get the best value for your money.

Plan Ahead

Planning can help you avoid emergency electrical repairs altogether. Regular maintenance and inspections can help identify potential electrical problems before they become serious issues. Schedule regular inspections with a licensed electrician to catch any issues early on.

Get Multiple Quotes

When you need emergency electrical repairs, get quotes from different electricians. This will help you compare prices and find the best value for your money. However, don’t choose an electrician solely based on price. Quality and reliability are more important factors to consider.

Consider Financing Options

Some emergency electrical service providers offer financing options to help you pay for repairs over time. Consider these options if you cannot afford to pay for repairs upfront. However, read the terms and conditions carefully and understand the interest rates and fees.

If you need an emergency electrician, look no further than Buffalo Electric. Our team of licensed and experienced electricians is available 24/7 to handle any electrical emergency that may arise. We pride ourselves on providing our customers with fast, reliable, and affordable emergency electrical services. Contact us now to schedule an appointment or to learn more about our services.

See our most recent blog on this topic here.

Photo By mihailomilovanovic at istock

Ways In Which An Electrician Can Help You Update the Electrical Panel

Electrical panels are an essential part of any home. They primarily protect your electrical systems, meaning you must always keep them updated and take good care of them. Many electrical gadgets are housed in the panel. Sometimes, replacing the entire panel or even upgrading it might be cost-prohibitive. However, there are several updates an electrician may undertake to ensure that your panel box functions optimally. Such updates make it simpler to access the panel box and its contents, and most of them include changing the panel hardware. Below are four ways your technician can help you upgrade the panel.

Clearing Obstructions and Obstacles

Based on where your electrical panel is installed, it might have some obstacles that inhibit its access or even make the housed electrical components inefficient. For instance, if your electrical panel is installed outdoors, some shrubs, vines, or bushes in your yard could be in the way of the panel. On the other hand, objects and items may be stored near the indoor electrical panel, making it hard to reach in an emergency. Ensure that the area around the panel is clear of any obstructions and obstacles that might hinder its access.

Labeling Your Breakers

Should something happen at your home that will make the circuit breaker trip, you want to be able to flip it back to the right position. However, if all the circuit breakers aren’t labeled correctly, you will not know the parts of your home the individual breakers control. Enlisting a technician to label your breakers means you will understand what each does and the appliance it controls. This makes things a lot easier for the professional if they are doing any repairs at your home. When creating the labels, the common areas or rooms are worth mentioning, ensuring anyone can easily understand which breaker affects where. However, whenever the breaker trips, you shouldn’t rush to the panel to push it into position, especially if it’s frequent or consistent. In such instances, you should have the professional inspect the electrical wiring and the affected appliance.

Grease the Latch and Door

It could get stuck if you do not open the electrical panel often. When this happens, you might have problems restarting the breakers, possibly leading to potential injuries. Hence, you should pay attention to the door hinges and latches. Ensure the electrical panel correctly opens without slowing down or stopping. The handle or latch should pull up or even open smoothly. It shouldn’t get stuck. If you notice such problems, ensure professional greases the affected parts. While you might feel that you are in a position to do this, you shouldn’t. If the grease touches any parts of the many electrical components of the panel, you could be exposed to a risk of electrocution.

Upgrading the Circuit Breakers

The circuit breaker is one of the most important protective components housed in the electrical panel. However, there are many breakers, each with very specific applications. Like any other electrical device or gadget, the breakers also experience issues like rusting, being covered with dust, or even old age. Has your breaker been tripping for no reason? You should have an electrician inspect it. One of the updates you can make to the electrical panel is upgrading the breakers to more modern and sensitive ones.

Is Updating the Electric Panel Worth It?

The electrical panel is, in most instances, installed out of sight. As such, you might employ an out-of-sight, out-of-mind approach when it comes to its maintenance. There is a high probability that you even think of it as it sits in your basement until it trips when you use a hairdryer when another person is heating food in a microwave simultaneously. Thus, you might be astonished when you reach it, only to find it covered with dust. When the day comes that you have to upgrade or even replace it, you could be shocked by the sheer high cost. However, it is well worth every penny. It even makes more sense to have had a plan with a reliable electrical services provider for maintenance to prevent anything terrible from happening. Below are reasons why it is worth upgrading.

You’ll have a Chance to Add Extra Circuits and Outlets

Electrical works aren’t an easy feat and certainly aren’t cheap. When you improve your electrical panel, you can add more outlets so that different rooms or appliances in your house can have enough electricity. You can save money on labor by doing it all at once because the electricians can complete it much more quickly.

Increases Your Home’s Safety

Electrical fires are the second most prevalent sources of structural fires. Studies have shown that about 51,000 electrical fires in homes occur every year. Unfortunately, old electrical panels or components significantly increase your exposure to fire risk at your home. Hence, updating or upgrading the panel to industry standards ensures your family is safe.

You Get More Efficient and Consistent Power

Over the past few decades, the electricity needed to power electronic devices has changed significantly, and efficiency has played a significant role. A modern electrical system and panel allow all your appliances and outlets to get the right amount of power for your needs, reducing strain on your appliances and lowering energy costs.

Always Hire Professionals

There are many other updates that you can do to your electrical panel. However, you should always hire an electrician for a minor or major upgrade. This is even more so if the panel changes include breakers and other hardware. After inspecting the panel, the professional can tell which components should be updated or whether you need to upgrade the entire panel with a new one. Doing this protects you from the dangers such as electrocution and electrical shocks.

Do you need yours upgraded or have questions about electrical panels? Contact us at Buffalo Electric today.

See our most recent blog on this topic here.

Photo By Kameleon007 at istock

Electricity and water make a dangerous combination. This is particularly applicable in our bathroom, where you use water from the shower to clean yourself and rely on electrical devices such as hair dryers and shavers. If you are not careful, you can put yourself and your family at risk of electrocution, shock, or fire. Hiring a licensed electrician is crucial to installing and repairing your bathroom electrical devices. Even if your electrical installations have complied with electrical standards, it’s up to you to ensure your safety and your family members from accidents. This article discusses tips on how to maintain safety in your bathroom.

Avoid Using Unnecessary Electrical Appliances in the Bathroom

Never use electrical appliances in the bathroom when in contact with or standing in water or on wet surfaces. This should be common sense, but sometimes people get careless or forget. Never use a portable heater or plug-in phone chargers while bathing. The problems start when you leave these appliances in the bathroom while plugged in. The moisture in the bathroom air can cause these appliances to get damaged and lead to potential electrical hazards. The best way to prevent electrocution is to keep all these appliances away from the bathroom. If you still need extra light or music, replace them with rechargeable or battery-operated devices.

Light Switches

For a bathroom, light switches should be located outside of the door. This is because they are connected to a live wire. If your hands are damp when you come into contact with the live wire, you risk severe injury and may get electrocuted. If the switch is mounted inside the bathroom, it should be mounted on the ceiling and use a cord to turn it. This is because you can get electrocuted when using a wall-mounted switch while standing in water. When installing light switches in your bathroom, hire a qualified electrician who meets all applicable safety standards.

Showerhead Heaters

Shower heaters are a convenient way to get hot showers, but they can also be a dangerous electric shock hazard. If you use a showerhead heater, ensure it is permanently wired or installed by an electrical expert. For water heaters that are not appropriately installed, thermostats can fail, causing water to become too hot. This can cause severe burns and fire risk. Never install a water heater yourself, especially if you are not trained. Many people make a dangerous mistake by mixing up live and earth wiring during installation, which may endanger your life. In such cases, getting a trained expert to install it is better.

Install GFCI-Protected Sockets

A GFCI-protected socket is a circuit breaker that automatically cuts off electric power when it senses an imbalance between incoming and outgoing current. It is an essential piece of electrical device in your bathroom to prevent electrical shocks from occurring. If a stray electric current comes into contact with human skin or water, the GFCI sockets device will automatically cut off the electricity to the outlet. GFCI outlets are safety features that are essential for all wet areas. If you have not already mounted a GFCI device in your bathroom or kitchen, make a point to contact a professional electrician to come and install it for you. This device will offer more protection in areas prone to water splashes and spillages. All electrical work must pass all required inspections and be performed by a licensed professional.

Opt for Ceiling Fan Heaters or Central Heaters

If you are considering purchasing an electric heater to cheer up your cold bathroom during winter days. You may wonder if the heater is safe for your bathroom setting. Some heaters are safe in the bathroom, provided they carry the appropriate IP rating and are installed by a trained electrical expert. All bathroom electrical appliances should also be hardwired so that they can be compliant with safety regulations. A professional will be able to assess all the loads in your home electricity supply and make suggestions accordingly. That’s why it is recommended to consult your electrical technician before choosing a heater.

Keep Electrical Appliances Out of Children’s Reach

If you must keep electrical appliances in your bathroom, ensure they are unplugged and appropriately stored away from the children, particularly razors and hair dryers. It is better to keep them in another room without water. A professional electrician can install bathroom wall sockets that can minimize the likelihood of shock when an appliance falls into the bathwater or sink.

Avoid Overusing Extension Cords

Because an extension lead can accommodate four plugs, it does not mean that you fill it up. The more you overload the plugs, the higher the electrical damage or injury risk. If you plan to blow dry or straighten your hair, only plug in one device at a time to ensure your safety. Leave your phone to charge in your bedroom. If these plugs are overloaded, the appliances can exceed the safety maximum, making them overhead and leading to fire risks. Use only one extension lead per socket. Danger signs are scorching, sparks, melting, or around an extension lead. If power automatically cuts off, then this is also a warning sign. As much as installing power outlets and sockets in the bathroom increases the risk of an electrical accident, you can require them to power various appliances. Ensure they are installed at least 3 meters from the taps and baths. This will help to keep them away from splashing water. Also, electrical sockets should be more than 300mm above the floor.

Now that you have learned essential electrical safety tips remember one more thing, never attempt any electrical repair or replacement on your own. Call a licensed electrical expert to handle your electrical wiring, circuits, and panel. If you need any electrical upgrades, replacements, or repairs, contact Buffalo Electric. We will ensure that your bathroom is safe for you and your family. Give us a call today to schedule an appointment and get started.

See our most recent blog on this topic here.

Find our service area here.

Photo By Ground Picture at Shutterstock

How A Good Electrician Can Impact Your Life

Electricity is essential to our lives; we rely on it to power everything from our homes to our workplaces. However, dealing with electrical issues can be dangerous, and it’s crucial to have a qualified and experienced electrician to help you. Whether you need help installing new appliances or repairing wires, there are many electrical services that you can benefit from.

Services Offered by an Electrical Expert

An electrician can help you fix a wide variety of electrical issues. Whether it’s simple, like installing new kitchen appliances, or something more complex, like correcting wiring issues, they can help with all sorts of projects. An expert will offer services such as:

Electrical Setup and Rewiring

If you’re building a new home, you may need to hire an expert to help you with the wiring. Depending on the needs of your home, your electrical setup may include electricity meters, distribution boards, and circuits. If your home is built by a general contractor or builder who is installing only some electrical wiring, you may need someone to do it. Buffalo Electric has experts suitable for this kind of job.

Electrical Appliance Repairs and Installations

Electrical appliances play significant roles in the house. Sometimes these appliances stop working properly or break for some reason. Broken appliances may cause serious electrical hazards if not dealt with quickly. To ensure that your appliances are working well for years to come, hire an expert to help fix them whenever they have issues. Buffalo Electric is a reputable company you can trust to handle problems with your electrical appliances.

Electrical Panel Installation, Upgrade, and Replacement

Sometimes you may need professional advice to help you determine whether you should replace your electrical panel. If your electrical panel isn’t functioning properly, it can cause serious damage to your house and even put your family in danger. A good electrical service provider will efficiently handle the panel replacement upgrade process.

Outlet Installation and Repair

When building a new home, you’ll need the help of an experienced electrician to install electrical outlets and switches. If you have outlets and switches in your home that aren’t working properly, call a reliable service provider to help you with the repairs. Buffalo Electric can readily respond to your needs whenever you contact the company.

Ensuring Your House Is Safe with Reliable Electrical Services

Your home is one of the most important things in your life, and ensuring it remains safe for years is crucial. Electrical issues can develop over time; some are relatively minor but require professional assistance. Whether you’re experiencing minor issues or something more serious, you can rely on a qualified, experienced electrical service provider like Buffalo Electric to help.

Ceiling Fan Installation and Repair

Ceiling fans can be dangerous. They can fall on you if they aren’t properly secured. Call an electrical professional to set up your ceiling fan correctly to prevent any injuries. If your ceiling fan isn’t working properly, you can visit a reliable service provider such as Buffalo Electric to help you with the repairs.

Electrical Wiring Installation

If you’re building a new home or installing new electrical systems, you may need experts to help with the wiring. A good company will have all the tools and equipment necessary for an effective electrical installation job. Whatever your home wiring needs are, an expert can handle them. Buffalo Electric has well-trained staff to handle all your wiring needs efficiently.

Smoke and Carbon Monoxide Detector Installations

Smoke and carbon monoxide detectors help keep your home safe by warning about fire and unusual buildup of carbon monoxide in the home. Such appliances may have issues periodically and need to be inspected. Call a professional to immediately replace your smoke or carbon monoxide detector if it’s malfunctioning.

Electrical Safety Inspections

Consider scheduling a safety inspection to ensure your electrical systems function properly. An experienced service provider can visit your home and check all the important electrical systems. If there are any issues with your wiring, they will let you know and help you repair it. Buffalo Electric provides electrical safety inspection services to ensure your and your family’s safety.

Tips to Find the Right Electrical Contractor

To ensure your home is safe and everything works properly, you should look for an experienced, reliable electrical service specialist. Some of the most common tips for finding the right expert include:

Look for Someone Licensed and Insured

Your service provider should be licensed and insured if you want quality electrical services. A license means that they have passed all the necessary tests and have proven that they know what they’re doing. An insurance policy will cover your home if any damage occurs during the service delivery.

Choose a Local Service Provider

Look for a local option to ensure your electrical specialists are easily accessible. If you already know someone who has used an electrician before, ask them to recommend someone. Otherwise, talk to your family and friends to see if anyone can recommend a trusted professional.

Consider Asking Friends and Family

If you’re a business owner, ask your customers if they can recommend a commendable electrical specialist. If you’re a homeowner, ask your neighbors if they know of an electrical contractor to help you. A company that bears a good reputation is a good choice. Previous customer satisfaction indicates that you’ll also be satisfied with the services offered.

Search Online

If you want to learn more about the services professionals offer, use the internet to find information about their experience and qualifications. You can even read customer reviews and testimonials to ensure they’re the right choice.

Always Check References

When you visit a potential contractor’s website, take some time to look at their customer reviews. Also, ask them for references you can contact to learn more about their services and what other customers think about their services.

If you’re looking for an expert to handle any electrical issues in your home, consider our company, Buffalo Electric. We offer electrical services that are reliable and professional. Visit us today or call us for more information.

See our most recent blog on this topic here.

Photo By Hispanolistic at istock

How An Emergency Electrician Can Solve Electrical Issues

Electricians are the unsung heroes of the modern world. They ensure that we have power for our lights, appliances, and electronics. Without them, we’d be living in the dark ages. However, even the most reliable electrical system can suffer from wear and tear over time, leading to the need for emergency electrician services. That’s where Buffalo Electric comes in. As a professional electrical company, they have a team of skilled and experienced electricians who can provide regular maintenance to keep your electrical system in top shape. In this article, we’ll explore the importance of electrician maintenance and how it can help you avoid emergency situations.

What Is Electrician Maintenance?

Electrician maintenance is a preventative measure that involves inspecting, testing, and servicing your electrical system. It’s like going to the doctor for a checkup, but for your home’s electrical system. The goal of electrician maintenance is to identify and fix potential issues before they become major problems. This helps to ensure that your electrical system operates efficiently and safely.

Why Is Electrician Maintenance Important?

Electricity is dangerous and a faulty electrical system can be a hazard to your home and your family. Faulty wiring, worn-out circuits, and overloaded electrical panels are just a few examples of potential issues that could lead to a fire or electrical shock. Regular electrician maintenance can help you avoid these dangers by identifying and fixing these issues before they become emergencies.

Benefits of Electrician Maintenance

Regular electrician maintenance is essential for ensuring the safety and efficiency of your home’s electrical system. Electrician maintenance also offers several other benefits beyond preventing electrical hazards. By scheduling regular maintenance, you can also save money on your energy bills, extend the lifespan of your electrical appliances, and avoid the inconvenience of sudden breakdowns or emergency repairs. With regular maintenance, electricians can identify and fix potential issues before they become major problems, ensuring that your electrical system runs smoothly and efficiently. Consider scheduling a maintenance appointment with a qualified electrician to enjoy the many benefits of regular electrical maintenance.

Top benefits of electrician maintenance include:

• Energy Savings: A well-maintained electrical system operates more efficiently, which can help you save money on your energy bills.
• Extended Lifespan: Regular maintenance can help extend the lifespan of your electrical system.
• Improved Performance: A well-maintained electrical system performs better, providing you with more reliable power.
• Peace of Mind: Knowing that your electrical system has been inspected and serviced by a professional can give you peace of mind, knowing that your family and home are safe.

What Does Electrician Maintenance Involve?

Electrician maintenance involves a series of tasks that are essential for ensuring the safety and efficiency of your home’s electrical system. One of the most critical aspects of electrician maintenance is checking electrical connections. Over time, electrical connections can become loose or damaged, which can cause electrical hazards, including sparks or fires. To prevent this from happening, electricians will inspect all electrical connections in your home to ensure that they are tightly secured and free from any wear and tear that may have occurred over time.

Another crucial aspect of electrician maintenance is testing electrical panels. These panels are responsible for distributing electricity throughout your home, so it’s essential to ensure that they are functioning correctly. Regular maintenance involves testing electrical panels to identify any possible malfunctions or worn-out parts that may need to be replaced. This can help prevent electrical issues from occurring in the future and ensure that your home is powered safely and efficiently.

In addition to checking electrical connections and testing electrical panels, electrician maintenance also involves inspecting and replacing electrical wiring and components as needed. This includes checking for loose wires, frayed or damaged wiring, and other issues that may pose a risk to the safety of your home’s electrical system.

Some electrician maintenance benefits include:

• Inspection: A professional electrician will inspect your electrical system for any potential issues, such as frayed wires or overloaded circuits.
• Testing: The electrician will test your electrical system to ensure that it’s operating as it should be.
• Servicing: The electrician will service your electrical system, which could involve replacing worn-out parts, tightening loose connections, or cleaning dirty components.
• Documentation: The electrician will provide you with a report of their findings and any recommended repairs.

Electrician maintenance is a vital part of maintaining a safe and efficient home. By taking steps, such as checking electrical connections, testing electrical panels, and inspecting and replacing electrical wiring and components, electricians can prevent potential hazards and keep your home running smoothly.

How Often Should You Schedule Electrician Maintenance?

The frequency of electrician maintenance depends on several factors, including the age of your electrical system, its usage, and its condition. Generally, you should schedule electrician maintenance once every one to two years. However, if you notice any issues with your electrical system, such as flickering lights or tripped circuit breakers, you should schedule an inspection as soon as possible.

Emergency Services

Despite the best preventative measures, emergencies can still happen. When they do, you need a reliable emergency electrician who can respond quickly and effectively. Buffalo Electric offers 24/7 emergency electrician services to help you when you need it most. Whether it’s a power outage, electrical fire, or any other electrical emergency, we have the experience and expertise to help you.

Don’t wait until it’s too late, schedule your electrician maintenance appointment with Buffalo Electric today to ensure the safety and efficiency of your home’s electrical system.

Electrician maintenance is an essential aspect of home maintenance that can help you avoid potential dangers and save you money in the long run. By scheduling regular maintenance with Buffalo Electric, you can ensure that your electrical system is operating safely and efficiently. If an emergency does happen, you can count on Buffalo Electric’s 24/7 emergency electrician services to quickly and effectively resolve the issue. Don’t wait until an emergency happens to take action. Schedule your electrician maintenance appointment today and enjoy the peace of mind that comes with a well-maintained electrical system. Contact Buffalo Electric now to schedule your appointment and protect your home and family from potential electrical hazards.

See our most recent blog on this topic here.

Photo By Evgen_Prozhyrko at istock

What To Look For When Hiring An Electrician

There are many types of home repairs and upgrades that a person can perform for themselves. Electrical work does not fall into these categories. While some projects, like replacing a faulty light switch, may seem simple enough to be performed as a DIY, they shouldn’t be.

One faulty connection or undersized wire is enough to create a situation that not only places your structure at risk but all the people who enter the building in danger. This type of work should only be performed by licensed professionals. The question is, what do you look for when hiring an electrician? What questions do you ask?

Are they licensed and insured?

Any professional electrician should be fully licensed and insured. Being licensed shows that they have been properly trained and proven they have the necessary knowledge needed to perform work on electrical systems. These licenses are granted by the State Licensing Board, which is responsible for maintaining testing and education standards.

A contractor being insured protects you as a client from any mishap or damage that may occur while they are working. This can fall on two levels. One is the technician being injured on your property, and the other is them causing any damage.

People who have passed their boards and have paid to be bonded and insured will not hesitate to show you their papers. They have worked hard to receive them and are rightly proud. If a company hesitates to show you proof, look for another contractor.

What services do they offer?

A company like Buffalo Electric offers a wide variety of services for both commercial and residential property owners. This is not true of all firms. Some electrical contractors are more specialized. There are companies that only focus on industrial, residential, commercial, or control work.

It is always a good idea to make sure that any firm you talk to offers a variety of services that you may have immediate or future needs for. This eliminates the hassle of having to seek and work with multiple contractors both in the present and future. Never underestimate the value of building a relationship with the people who will play a role in the safety and security of your property.

When are they available?

A sad truth of working with people in a high-demand field is that many times there is more work than qualified people to perform it. This means that other than in emergency situations, there can be a lengthy wait to have the work you need to be performed gotten to.

If you have a specific timetable in mind for your project(s), it is best to check the scheduling availability of the company you are talking to early in your discussions. This can be especially true during prime construction periods. It is also advisable to try to plan as far in advance as you can to help assure you get the best companies to work with. As with most skill fields, the best is also normally the busiest.

Do they offer a guarantee?

Another sign of a true professional is that they will warranty or guarantee their work. Any technician worth his salt should have enough confidence in the materials he uses and their own technical skills to stand behind the work they perform.

If a contractor is not willing to back their work in writing, you should immediately be suspicious of their qualifications.

How much do they charge?

This can be a delicate subject to discuss and is one area that many consumers place too much infuses on. No electrician worth working with is going to come at bargain-basement prices. The demand for their skills is simply too high.

What trips many people up is going with the lowest possible bid. Many times this is not the bargain that it may appear to be. A technician that charges twice the rate of another may be a better deal in the long run.

An electrical tech that shows up with a van fully stocked with all the tools and parts that he may need is not going to be wasting their time and your money running to pick up this or buy that. They will arrive ready to work. Get the job done quickly and efficiently. Then move on to their next project.

Do they offer written estimates and contracts?

Related to the subject above, for any job, large or small, an electrical firm should have no issue with providing you a cost estimate up front and putting it in writing. For larger projects, there should not only be an estimate given but a contract drawn up.

This should include the contractor’s name, business contact information, an exact description of what is and isn’t included in the work, and a copy of any estimates or bids that have been given.

This is to protect both you and the contractor from any misunderstandings that might arise. A good rule of thumb in any business dealings is; if it is not in writing, it doesn’t exist. Be very suspicious of people who want to avoid putting their commitments in writing.

Did you check their references?

This one is entirely on you as a client. Have you done your due diligence before picking the electrician you want to work with? Most contractors will be more than happy to give you a list of satisfied customers you can talk to.

The smart customer will go beyond this surface investigation and look for BBB complaints and check for independent reviews online.

Buffalo Electric has been serving the needs of Dallas, Fort Worth, and the surrounding area for over a decade with conscientious, professional services. Whether you have an emergency situation, are planning an expansion, or want to affirm your building is up to code, we can help. You can contact Buffalo Electric day or night through our website or by calling 817-210-3010.

See our most recent blog on this topic here.

Photo By SDI Productions at istock

Importance Of Working With A Certified Electrician

Handling electrical installation and repair is not your typical DIY project since it has several risks. Local authorities in Grapevine encourage homeowners to call a certified electrician to help deal with electrical issues, from installation to maintenance and repair.

An electrical system is a complex installation that relies on panels, outlets, breakers, and wiring to supply power where needed. Attempts to handle these problems on your own, especially with little to no background in electrical installation, could result in more damage.

While there are issues you can handle, including changing a bulb or tightening a switch, it’s best to leave electrical issues to a professional. Below is an overview of the importance of leaving your electrical work to an expert.

Reasons to Hire a Certified Electrical Technician

Safety

The most important reason to get a professional for your electrical issues is safety. A Certified electrician is equipped with the necessary tools and procedures to ensure their safety and those within the work area. Aside from your physical safety, the technician is able to secure the work area to prevent further damage, preventing accidents such as electrocution or electrical fires.

Electrical installations are delicate and need to be approached with the utmost care and appropriate safety equipment. Approaching it as a DIY project not only puts you at risk but leaves you vulnerable to long-term safety hazards. No matter the scope of the work, have an expert do a full analysis and advise you accordingly.

Skills and Expertise

A certified electrical technician is trained and certified to handle multiple electrical problems. During certification, the professional is subject to several tests to gauge their skill levels to ensure they are knowledgeable and grasp concepts related to handling electricity.

Hiring a certified technician means you are working with someone who understands what they are doing. The best part is that experts leverage their experience handling different issues to offer a lasting solution to your electrical issues.

Before hiring an electrician, it’s wise to do a background check on their credentials to ensure they are licensed, insured, and rated. Online reviews can help gauge their customer engagement and service delivery, enabling you to make an informed decision.

Troubleshooting

A warning sign may alert you to an immediate issue with your electrical system. However, finding the root cause may be difficult, especially if you don’t have the necessary tools to run a full diagnosis. A professional has the tools and techniques needed to troubleshoot your issues and find the best fix for your system.

When troubleshooting, you need to understand how your electrical systems function to see how best to approach the issues. Without this knowledge, it can be frustrating forcing you to spend countless hours on a simple issue. Get a certified technician to run diagnostics on your system with little time and effort.

Saves You Money

Approaching an electrical problem as a DIY project may seem like a good way to save money instead of hiring a professional. However, what people fail to realize is that a simple mistake during installation or repairs may result in expensive repairs and replacements, forcing you to go over budget. Hiring a professional not only saves you money but time. A professional is able to troubleshoot the issue within the shortest time possible, allowing you to resume your schedule. This means you can go back to work faster.

Aside from the cost of the repairs, working with a professional gives you access to insurance coverage. This policy protects you from financial liability in case of work-related injuries or a botched job. A professional’s insurance cover will take care of labor, part, and other expenses, in case the technician is responsible for injuries or delayed completion.

Access to Permits and Adherence to Electrical Codes

Each zip code has specific building codes that apply to electrical works, including installation, maintenance, and repairs. Working with an unlicensed technician may violate electrical codes, attracting legal suits in the process. A reputable firm such as Buffalo Electric helps you stay within the law and observe all electrical work regulations.

An electrical expert is well-versed in local electrical codes and will likely tailor their work and installations to meet local requirements. A certified technician disregarding local codes risks legal action and, in most cases, may have their license revoked.

Your home insurance company may refuse to honor your claim if the expert violates any of the electrical codes.

Another advantage of working with a professional is that they can help you secure permits quickly. Electrical contractors are constantly working on a project, hence frequent local authorities for permits. This means they can secure permits for any of your electrical projects and ensure you stay within the law.

Provide Long-Term Solutions

A professional will not only focus on the problem at hand but also run a full diagnosis of your system to unearth hidden issues. An experienced technician will address the electrical issues while working with you to provide a long-term solution to the problem. Leveraging their skills and expertise, the expert is able to find the best solutions while delivering quality work, thus lowering the possibility of damage in the future.

Service and Maintenance

Electrical contractors usually keep records of their work. This includes details on installations, adjustments, repairs, and maintenance. Using these service logs, the contractor is able to understand your needs and spend a little less time troubleshooting your electrical issues.

A detailed service log is not only helpful to the contractor but is important to the homeowner. These documents explain the procedures and costs associated with the work; this way, you know what you are paying for. You can as well use this information when filing a claim from your home insurance provider.

A certified electrician is knowledgeable and has the necessary experience needed to handle different electrical works. These contractors can also help you observe laws and regulations governing electrical works, thus shielding you against legal action.

Contact us at Buffalo Electric for more information on electrical works, including installation, repairs, and maintenance. We will quote our services and professional opinion on your project.

See our most recent blog on this topic here.

Photo By rawf8 at Shutterstock

When it comes to electricity, you can never be too safe. There is a reason why most electricians recommend that homeowners not handle electrical repairs independently – because it’s dangerous. While electricity is how we all power our homes and our devices, it comes with its own set of risks. Fires and electrocution are two substantial risks that come with electrical problems, which is why you need to know when to call an emergency electrician. Not every electrical issue requires urgent attention, but a cautious approach to electricity is always the best choice.

As mentioned, if you are a homeowner, it is probably a better idea if you don’t attempt to handle your electrical issues. That said, not everything means that you need an emergency electrician. If you want to install a ceiling fan, you can schedule that and wait until an electrician is available. On the other hand, if your ceiling fan comes out of your ceiling and is hanging by the wires, that is a very different situation. While you are unlikely to find yourself in this exact situation (at least we hope), there are many other situations you might find yourself dealing with.

For that reason, we have created this simple guide that covers five of the top reasons you may need an emergency electrician. If you find yourself dealing with any of these situations, it is a clear sign that you need to call for some help. Whenever there is a safety risk involved with a situation, it is just not worth taking a chance. Not when help is only one quick phone call away.

Circuit Breakers Repeatedly Trip

First of all, if you are experiencing an issue with your circuit breaker box, you need to call an emergency electrician immediately to get to the bottom of this. It is usually evident this is an issue because your circuit breaker will continue to trip until you do something about it. Circuits are designed to trip when there is a power surge or when the demand on a circuit is too high overall so that there is no danger to your home.

The idea is to kill all of the electricity so that there is no danger of electrocution or damaged appliances. Of course, this also can protect your home from an electrical fire if a short is detected somewhere in your electrical system. It is not abnormal for a circuit breaker to trip every so once in a while, but if your circuit breaker continues to trip, this is a sign that you have an electrical emergency on your hands. Twice or more on the same day or a couple of times within a week is enough to warrant a call to an emergency electrician to figure out what is happening.

Burning Smells

Another sign of an electrical problem within your home is if you notice burning smells in your home. Burning smells usually are associated with electrical wiring, especially if there are no other explanations, such as a wood-burning fire outdoors. If you can isolate the smell to an area in your home, it is wise to turn off the circuit to reduce electrical current near the potential smoldering wire. Then you need to call an emergency electrician right away to come out and look at the problem.

If you cannot find the location of the issue, don’t worry. It is better not to waste time looking for it when you can be on the phone with a professional. This is the type of situation where it is best not to waste time because you want to get a professional emergency electrician out to your home right away to diagnose the problem. Panic won’t help you, but calling in someone who knows how to isolate electrical problems will.

Buzzing Noises

Another indication that something is going on with your electrical system is a buzzing noise. If you hear constant buzzing, there is a good chance that it is coming from smoldering wiring or an area that is short-circuiting. Unless you happen to breed bees, it is never a good sign to hear buzzing repeatedly. Instead of getting annoyed, you should call an emergency electrician to come out to your home to get to the bottom of the situation.

Warm Power Outlets

Another signal that it may be time to call an electrician in Texas is if you notice that your power outlets are warm to the touch. There is absolutely no good reason to explain why an outlet should be warm to the touch. The only reason that this happens is that there is a short behind the outlet or an exposed wire that is sparking and releasing heat. This is a major fire hazard and one that needs to be addressed right away. It’s a good idea to get in the habit of occasionally touching outlets that are not in use and/or fixtures to ensure you don’t have a problem under your nose.

Lights Keep Flickering

Finally, a big sign that something is wrong with your electrical system is flickering lights. Many people notice this happens when their HVAC system turns on or when they run a major appliance such as the stove or the microwave. When this happens, it indicates a power surge in your home or too much demand on a circuit. You need to call an emergency electrician before this system results in a short circuit which can be a dangerous situation.

Are you worried about an electrical problem in your home? Contact Buffalo Electric to get help from professional electricians.

See our most recent blog on this topic here.

Photo By atakan at istock